 |
| 3CS-100 Fender & Tank Set |
|
3CS-100 Deluxe Fender & Tank Airbrushing Stands
3 Stands: Fold for convenient storage or to hang up on a wall when not in use. Powdercoated red for a finished look. Non skid black caps on base.
5 Mounts: Mounts rotate a full 360 degrees or can be locked into place so they don't rotate at all. Each mount is removable from the extension pole-allowing you to mount your tin on or off the stand. They are powdercoated grey for a finished look. The MOUNTS are as follows:
1st Mount: GAS TANK- Adjusts from 13" up to 20 3/8" hole pattern.
2nd Mount: REAR FENDER- Adjusts from 9 1/2" up to 15" hole pattern.
3rd Mount: FRONT FENDER- Adjusts from 2 1/8" up to 3 3/4" hole pattern.
4th Mount: SPLIT GAS TANKS- Works with both early and late model split tanks.
5th Mount: BOTTOM MOUNTED GAS TANKS- Works with custom Stretch Tanks.
You will also receive the following:
3 Extension Poles: These poles rotate on a 45 degree angle, allowing you to paint the underside of your tin with ease. They adjust to 3 different height settings and are powdercoated grey for a finished look. These poles fit into the stands and the mounts then fit into the poles.
6 Mounting Rods: These rods hold your tin onto the mounts.
|
 |
| Stretch Tank Mount |
|
|
 |
| Early & Split Mount |
|
|
 |
| Stands Folded |
|
|
| 3CS-100 is $395.00 including shipping. Florida residents must pay sales tax. Use the "Add to Cart" button to purchase with PayPal now. |
 |
| 3CS-50 Starter Set |
|
3CS-50 Starter Set
3 STANDS: The stands are foldable allowing for easy storage or to hang on a wall when not in use. The stands also have skid proof caps at the base, are lightweight and powdercoated red for a finished look.
3 MOUNTS: Each mount is removable from the stand . They are powdercoated grey for a finished look. The individual mounts are as follows:
1st Mount: GAS TANK-Holds solid mounted tanks as well as custom bottom mounted tanks. Tin is secured on the front of the mount, and the back of the tin rests on the back of the mount.
2nd Mount: REAR FENDER-Holds any fender with a side hole pattern. Tin is secured on front of mount and rests on the back of mount.
3rd Mount: FRONT FENDER-Holds any fender with a side mounted hole pattern. The tin is secured on the front of the mount and rests on the back of the mount.
3 Extension Poles: Allows you to customize the height of your tin to your preferred height while painting.
YOU ALSO RECEIVE: 3 MOUNTING RODS -To secure the tin to the front of the mounts.
|
| The 3CS-50 is $250 including shipping. Use the "Add to Cart" button to purchase with PayPal. Florida residents must pay sales tax. |
|
