Individual Mounts

Conley Paint Stands mounts for motorcycle fender gas tanks fairings and saddlebags we sell one piece or the set of mounts. So if you already have a set of our paint stands and just want extra mount or if you have your own stands.

Individual Mounts and Parts (base and pole not included)

3CS-GM 1 pieces gas tank mount for Harley Touring Softail 2000 and up, Sportsters and Dyna models, comes with mount and 2) 6 inch pins not seen in photo this mount is adjusting to line up with the mounting tabs on tanks.

3CS-GM

3CS-RFM Rear fender mount with adjusting to line up with fender struct holes in the rear fender can be used for American and metric bikes comes with 2) 12 inch 1/4 rods not shown in photo.

3CS-RFM

3CS-FFM Front Fender mount will hold fenders with vertical or horizontal hole patters in fender mounts will work with american and metric bikes comes with 2) 12 inch pins not shown in photo.

3CS-FFM

3CS-ELST Split gas tank mount for late style Softail rubber mounted tanks and left and right early adapters that mount to the late style mount to hold early split tanks from 1936 and up Harley’s.

3CS-ELST

3SC-BTM bottom gas tank mount for aftermarket tanks that mount from the bottom this mount is adjusting to line up wit the threaded holes in the bottom of the tank.

3CS-BTM

3CS-100GRF set includes the 3CS-GM,3CS-RFM and 3CS-FFM fender and gas tank mounts set for sportster touring 2000 and up softails and dyna’s models.

3CS-GRF

3CS-GRFD Deluxe fender and gas tank mount set 5 mount all together 3CS-GM, 3CS-RFM, 3CS-FFM, 3CS-ELST and 3CS-BTM for Harley’s from the 50’s to present.

3CS-100GRFD

3CS-FS Fairing Mount Designed for Harley upper inner or outer Fairings and more will hold a FLHTC inner or outer for road glide outer but not the inner fairing the lower part of the mount is adjusting about 6 inches up and down.

3CS-FS

3CS-SBSM Saddlebag mounts and adapter set for Harley Davidson Hard saddlebags and aftermarket bags 2 lid mounts that are fixed plus a adapter pole to hold both lids to one base at same time and 2 lower bag mounts that are adjusting these mounts have been updated foam pads on mounts so inside of bags and lids do not get scratched up.

3CS-SBSM

3CS-AD1 Adapter pole can be used to hold a inner or outer fairing mounts on 1 stand or fenders or just short 1 base good to have at the last minute. 18 inches long with a 2 inch off set.

3CS-AD1